Resinous
Flooring Systems

DiamondMetallic is a 40 mil, 100% solids decorative metallic system, built from either UV resistant epoxy or polyaspartic urethane. This system has unlimited moisture control and has a topcoat of Eco-Top chemical resistant urethane. System can have an optional matte finish.

DiamondCast Metallic is a 100 mil, 100% solids epoxy broadcast floor with decorative metallic topping built out of polyaspartic urethane. The material is laid out and then a liquid dispersing agent is sprayed upon the wet polyaspartic to distress the metallic partials to produce a decorative and variegated finish. This system has unlimited moisture control, excellent UV, and chemical resistance.

DiamondCrete Metallic is a 175-250 mil, four component urethane cement mortar system broadcast with aggregate, grout coated with multiple coats of either epoxy or urethane metallic and sealed with an aliphatic urethane. The material has unlimited moisture control, outstanding impact, abrasion, and UV resistance, in a metallic system.

DiamondTraffic is a nominal 45-60 mil elastomeric urethane system for use on parking decks. The system consists of an unlimited moisture-tolerant primer, an elastomeric base coat, wear coat for ramps and turn areas and an aliphatic-elastomeric urethane topcoat. DiamondTraffic includes a 5-year warranty that can be extended to 10-years if wear coat is installed on the entire deck. Base system has the wear coat on ramp and turning areas only.

DiamondCast Flake is a 60 mil, vinyl flake broadcast floor with an aliphatic polyaspartic urethane topcoat. The system has unlimited moisture tolerance, and excellent UV, abrasion, and chemical resistance.

DiamondHD Flake is a heavy duty, four-component troweled epoxy mortar system with decorative flake finish. This system exhibits unlimited moisture tolerance, outstanding impact resistance, excellent abrasion, chemical and UV resistance. DiamondHD Flake is finished with polyaspartic urethane to give it excellent chemical and UV resistance. Installation floor thickness is 125-250 mil.

DiamondCrete Flake is a four-component urethane cement system that ranges from 175-250 mil. This system has unlimited moisture control, excellent chemical resistance, and outstanding impact resistance. DiamondCrete Flake has a thermal coefficient of expansion that is almost identical to concrete so it moves with the concrete during extreme temperature changes. It is available in a wide array of flake colors and blends.

DiamondCast Quartz is a four component, 100% solids broadcast epoxy floor with a polyaspartic urethane grout/topcoat. This system ranges from 90-175 mils and has unlimited moisture tolerance, along with excellent UV, abrasion, and chemical resistance in a decorative quartz system.

DiamondHD Quartz is a heavy duty, four-component troweled epoxy mortar system. This system exhibits unlimited moisture tolerance, outstanding impact resistance, excellent abrasion, chemical and UV resistance. DiamondHD Quartz is finished with polyaspartic urethane to give it excellent chemical and UV resistance. Installation floor thickness ranges from 175-250 mil.

DiamondRock is a troweled, decorative stone system that ranges from 250-375 mil. It provides a beautiful decorative finish. DiamondRock has unlimited moisture tolerance, troweled stone mortar, and polyaspartic urethane finish. DiamondRock has excellent abrasion, and UV resistance, providing a long-life cycle.

DiamondESD CRU NANO is a nominal 40 mil system comprised of an unlimited moisture tolerant primer, a body coat of 100% solids epoxy, and a topcoat of aliphatic polyester urethane with exceptional static control. This system Utilizes NANO technology to deliver consistent readings in either the conductive or dissipative range. This system differs from the epoxy-based systems in that it delivers greater abrasion resistance and better UV resistance. Electrical properties are consistent for the life of the floor. An optional aggregate can be added to provide increased slip resistance, increasing the coefficient of friction of the surface, without compromising the resistivity.

DiamondSlurry ESD NANO is a nominal 40 mil, 100% solids, self-leveling epoxy, ESD system. This system is formulated to provide unlimited moisture tolerance, and exceptional static control, by utilizing nano technology producing body voltage readings of <10 volts. This system has a texture for slip resistance engineered into the product. Additional slip resistance can be added if desired.

DiamondSlurry ESD is a 50 mil, 100% solids, four-component epoxy ESD system. It is designed to furnish electrostatic in the dissipative range, or with the addition of conductive ground plane, delivers readings in the conductive range. This system has Unlimited Moisture Tolerance and the finish is smooth, durable, and high gloss, for ease of cleaning.

DiamondHD ESD is a 125-250 mil, heavy duty four-component troweled epoxy mortar ESD system. This system is formulated to provide unlimited moisture tolerance, outstanding impact resistance and reliable static control, with body voltage readings of <100 volts. Aesthetically the system has a beautiful wet look finish. DiamondHD ESD is engineered to disperse the charge uniformly through the system and provides consistent electrical performance for the life of the floor.

DiamondErgo is a seamless rubber filled urethane flooring system that ranges from 250-375 mil. The system provides a decorative rubber aggregate with a sterile, ergonomic slip resistant finish. The system is designed for noise suppression and an ergonomic, comfortable anti-microbial finish to stand on. System is grout coated with Polyaspartic Urethane and can be sealed with Eco-Top WB for a matte finish.

Grind and Seal consists of grinding the floor in opposing directions to expose salt and pepper aggregate. A 5 mil, moisture tolerant primer and a high solids aliphatic urethane with exceptional abrasion resistance is installed. The Grind and Seal System have some similarities to polished concrete but has much better stain resistance.

DiamondGlaze is an epoxy-urethane wall System, consisting of a moisture tolerant primer, a thickened epoxy body coat, and an aliphatic urethane topcoat. DiamondGlaze provides absolute UV, Chemical, and abrasion resistance, and can be used on concrete, block, or drywall. Chopped fiberglass can be blown into the surface to strengthen applications over drywall.